Aprilaire 6996 Tube and Probe Kit for Static Pressure Bypass Dampers
Ask a Question
About this Product
The Aprilaire 6996 Tube and Probe Kit should be installed into the main supply plenum downstream of the bypass damper and at least 2 to 3 feet from the air handling unit in a straight section of the duct at the center line. Attach one end of the sensing tube to the static pressure control and the other end to the pressure sensing probe.
Please Note: Many factors influence the performance of the damper including inlet and outlet conditions. Your application conditions are unlikely to match the test conditions exactly. These instructions are meant as guidelines only.
Write Your Own Review:
Questions & Answers
If you are a new customer, please register first:
You may also be interested in the following products: