Bosch Tankless Water Heaters
Never run out of hot water again. Bosch Tankless Water Heater offer a near-limitless supply of hot water, available in a variety of models. A Bosch point-of-use tankless hot water heater is designed to work with a single fixture, be it a sink/faucet, shower, dishwasher, or washing machine. Bosch point-of-use tankless water heaters are extremely convenient if you have a need for hot water where a typical hot water outlet is not currently available. Bosch point-of-use tankless units are also great for home additions, back houses, guest houses, remote areas, and cabins. If you are looking to replace your existing tanked water heater with a tankless version, a Bosch whole house tankless water heater is a great solution. It can provide a larger volume of hot water, so you can run multiple bathrooms and kitchen without a problem. Bosch whole house tankless water heaters use electricity to heat water as it passes through a heating element. The heating element quickly but gently heats the water as it flows to your fixture. This method means there is no need for hot water storage, providing you with a near-endless supply of hot water.
How to Select
How to Select a Tankless Water Heater
The most important factor when deciding which tankless water heater to purchase is based on the number of fixtures you need to get heated water to and the amount of water to heat. It is not uncommon for a homeowner to purchase the tankless unit that seems correct for their application to find that they miscalculated. We always recommend purchasing a tankless unit with redundancy in output; therefore you will never have an issue with lack of hot water. Most ratings from the manufacturer do not take into account your unique plumbing situation, so consulting a professional is recommended.
Before you pick out your tankless heating unit, you will want to check the following:
- Power Type: Electrical, Natural Gas, Liquid Propane. Depending on your house utility configuration, you can connect a tankless unit to any of the following power sources, however, you must consider that an electrical tankless unit will not work in Natural gas applications or Propane, and vice versa.
For Electric Tankless Heating Units, your amperage and voltage are very important. Your breaker size may be too small, or may need to be upgraded to accommodate the new heater. If this is the case, upgrade to a breaker that will have some redundancy in power rating.
(For example, if your tankless heating unit requires a 40 Amp breaker, we recommend installing a 50 Amp just in case.)
- How far your tankless heating unit will be installed from your fixtures. If your heater is too far from your shower, or faucets, they will either get a reduced flow of water, or a lack of heat. This is caused by the added traveling distance the water must travel through your pipes. If this is a concern for you, consult our staff for expert advice, or consult the installer for recommendations.
- Whole house or Point of Use. Point of use tankless units only operates with a single fixture at the point of use. Some point of use models can work with extension kits to expand usage to multiple fixtures. Whereas whole house tankless units are designed for larger volumes and will provide heated water to all fixtures in your household. Once again, it is important to take redundancy into account with Whole house heaters to make sure each fixture has steady, warm flow.
For additional assistance, or for expert advice, contact our Customer Service Department through Live Chat or by calling 1-877-998-9378.