Eemax Series Three Commercial Electric Tankless Water Heater, 240V / 120A (3 x 40A)

Product Information:

About The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater, 240V / 120A (3 x 40A)

The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater is an energy efficient unit that is designed to cut energy costs by only activating the heater once the flow has been turned on eliminating standby heat loss.  The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater is 99% energy efficient because almost every bit of energy is used to heat the water and not wasted.  The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater also features a compact design that will fit just about anywhere and also eliminates the need for a bulky water tank.  The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater also offers very easy installation and does not require a T&P valve, simply run one cold water line to the lavatory.  This great tankless water heater will provide you with on demand hot water that will never run out.

The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater operates on 240 volt power supplies and requires three 40 amp breakers (120 Amps).  The minimum flow rating for this great tankless water heater is 1.8 GPM and has an maximum flow rating of 5 GPM.  The temperature will start to rise from 76 degrees Fahrenheit at 2.5 GPM.  The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater utilizes 3/4" male NPT fittings on the bottom of the unit.  The Eemax EX280T3 Series Three Commercial Electric Tankless Water Heater measures 15-1/4" x 12-1/4" x 4-1/4".

Additional Information:

EX280T3 Tankless Water Heater Spec Sheet

EX280T3 Tankless Water Heater Owners Manual

Features:

• Cut energy costs - flow switch activates heater only on demand (no standby heat loss)
• 99% Energy Efficient - The power you use goes into the water, not up the chimney
• Compact Design - No need for a bulky tank
• Ease of installation - No T&P valve needed - Only bring one cold water line to lavatory
• Hot or Cold Water Feed
• On demand hot water - never run out
• Limited warranty: 1 year parts, 5 year leaks

Specifications:

• Voltage: 240V
• Power: 28.5kW
• Amperage: 120A (3x40A) Three breakers
• Dimensions: 15 1/4" x 12 1/4" x 4 1/4"
• 1.8GPM minimum turn-on
• 5 GPM
• Temperature rise at 2.5 GPM = 76°F
• 3/4" Male NPT fittings on bottom of unit
• Weight: 16 lbs
• Proudly made in USA