Eemax Series Four Commercial Electric Tankless Water Heater, 240V / 160A (4 x 40A)

Product Information:

About The Eemax EX380T4 Series Four Commercial Electric Tankless Water Heater, 240V / 160A (4 x 40A)

The Eemax EX380T4 Series Four Commercial Electric Tankless Water Heater is great ways to cut significantly reduce your water heating energy costs.  This great tankless water heater reduces your energy costs by only activating the heating element when the flow has been turned on, thus eliminating standby heat loss.  The Eemax EX380T4 Series Four Commercial Electric Tankless Water Heater operates at 99% efficiency, supplying nearly all the power to heat the water with nearly zero energy being wasted.  The Eemax EX380T4 Series Four Commercial Electric Tankless Water Heater features a compact design that can be mounted just about anywhere and eliminates the need for a bulky tank.  The Eemax EX380T4 Series Four Commercial Electric Tankless Water Heater is also very easy to install and requires no T&P valve, just bring a single cold water line to the lavatory.  This great tankless water heater offers both hot and cold water feeds, and provides on demand hot water that will never run out.

The Eemax EX380T4 Series Four Commercial Electric Tankless Water Heater operates on 270 electrical supplies, and requires 4 40 Amp breakers (160 Amps).  The minimum flow rating for this great tankless water heater is 2.4 GPM and has an maximum flow rating of 8 GPM.  The temperature will start to rise from 103 degrees Fahrenheit at 2.5 GPM.  The Eemax EX380T4 Series Four Commercial Electric Tankless Water Heater utilizes 3/4" male NPT fittings on the bottom of the unit.

Additional Information:

EX380T4 Tankless Water Heater Spec Sheet

EX380T4 Tankless Water Heater Owners Manual

Features:

• Cut energy costs - flow switch activates heater only on demand (no standby heat loss)
• 99% Energy Efficient - The power you use goes into the water, not up the chimney
• Compact Design - No need for a bulky tank
• Ease of installation - No T&P valve needed - Only bring one cold water line to lavatory
• Hot or Cold Water Feed
• On demand hot water - never run out
• Limited warranty: 1 year parts, 5 year leaks

Specifications:

• Voltage: 240V
• Power: 38kW
• Amperage: 160A (4x40A) Four breakers
• Dimensions: 20 3/16" x 12 1/8 x 4 1/8"
• 2.4GPM minimum turn-on
• 8 GPM
• Temperature rise at 2.5 GPM = 103°F
• 3/4" Male NPT fittings on bottom of unit
• Weight: 20 lbs
• Proudly made in USA