Elkay Drinking Fountain, 7.5 GPH Soft Sides Bi-Level Hands Free - Stainless Steel
Ask a Question
About this Product
Product Information:The Elkay Soft Sides Refrigerated Fountain Series Bi-Level Sensor Operated water fountain - Stainless Steel (EROM28K) is the functional water fountain for everyday use. These water dispensers come with electronic hands-free sensor operation, 18 gauge type 304 nickel bearing stainless steel fountain bodies and front panel grill polished to a lustrous satin finish with high shined outer edges, fully functional front push buttons, exclusive Flexi-Guard safety bubblers and flush wall mounting design. These water fountains are also equipped with a No-Lead design waterway system, and are completely ADA compliant.
Model(s) MF200 Mounting Frame Is Included
Features:• 18 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge
• Electronic sensor Hands-Free operation
• Contoured basin offers large strike area to minimize splashing
• Fully functional front push button is easy to operate
• Flexi-Guard safety bubbler uses a pliable polyester elastomer to prevent accidental mouth injuries and is keyed in location to prevent rotation
• Removable louvered ventilating grill encloses refrigeration unit and plumbing
• Meets adult and child ADA requirements
• Easy accessible thermostat is factory preset and requires only altitude adjustment
Specifications:• Finish: 18 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge
• Electronic hands-free sensor operation that is actuated by an infrared beam sensor with a maximum running time of 30 seconds that streams from 20 to 105 psi
• Flow Rate: 7.5 gph
• Volts/Hertz: 115 V/60 Hz
• Base Rate: 7.5
• Rated Watts: 370
• Full Load Amps: 4.0
• GPH of 50°F Drinking Water: 70°F= 8.6, 80°F= 8.1, 90°F= 7.5
• Elkay Pressure-Type Water Coolers are designed to operate on 20 psi to 105 psi supply line pressure. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line
• Motor Compressor: Hermetically sealed, reciprocating type, 115 Volt/60 Hz, single phase that is sealed-in lifetime oil supply
• Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
• Cooling Unit: Combination tube-tank type, stainless steel, self cleansing, tube portion is continuous coil of copper tubing, fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing plastic material
• Refrigerant Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free operation.
• Temperature Control: Enclosed adjustable thermostat is factory pre-set. Requires no adjustment other than for altitude requirements.
SECOND THROUGH FIFTH YEARS: The Manufacturer warrants the compressor and hermetically sealed refrigeration system, including cooling coils or tank assembly when part of the hermetically sealed refrigeration system, to be free from defects in material and workmanship under normal use for an additional four (4) years from the end of the one (1) year period described above. Packaged water chillers are not subject to the additional four (4) year warranty when used in chilled water commercial/industrial applications other than for potable water.
This Limited Warranty does not include payment for any field labor to provide for normal maintenance including adjustments such as water stream height, water temperature or electric eye sensitivity. The water system and regulating valve are not covered by this Limited Warranty if they become inoperative due to liming, sand or similar residue. This Limited Warranty is voided if repairs are made by an unauthorized party or the serial number data plate is removed or defaced. Normal deterioration of finish due to use and exposure is not covered by this Limited Warranty. The Manufacturer is not liable for repairs, whether cosmetic or structural, to walls where cooler and packaged water coolers are built into the wall. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this water cooler to supply line pressures lower than 20 psi or higher than 105 psi is not covered by this warranty.
Write Your Own Review:
Questions & Answers
If you are a new customer, please register first: