Elkay Deluxe Wall Mount Drinking Fountain, 4.0 GPH - Stainless Steel
Ask a Question
About this Product
The Elkay Deluxe Wall Mount Cooler, 4.0 GPH - Stainless Steel (EWA4S1Z) is a self-contained, electric refrigerated, wall hung water cooler that is perfect for high volume areas. This water fountain has a capacity of 50°F drinking water, based upon 80°F inlet water and 90°F ambient. One piece stainless steel top, polished to a uniform Elkay bright luster finish. Exclusive Cascade basin tested most splash-resistant, features multi-level deck design with a built-in vandal-resistant strainer. Non-pressurized tank system is standard and is located after bubbler valve, so that the tank is subject to line pressure only when the valve button is pressed.
This product has additional required/recommended options depending on your configuration: Model(s) RP2130
Manufacturer Specification Sheet (PDF File)
• No Lead Design-Water system free of lead-containing brass parts
• Cascade basin
• Flexi-Guard safety bubbler
• Non-pressurized cooling tank
• Removable front panel
• Complete with mounting hanger
• GPH 4.0 Based on 80 degree inlet water temperature, 90 degree room temperature and 50 degree drinking water temperature
• Rated Watts: 230
• Full Load Amps: 2.5
SECOND THROUGH FIFTH YEARS: The Manufacturer warrants the compressor and hermetically sealed refrigeration system, including cooling coils or tank assembly when part of the hermetically sealed refrigeration system, to be free from defects in material and workmanship under normal use for an additional four (4) years from the end of the one (1) year period described above. Packaged water chillers are not subject to the additional four (4) year warranty when used in chilled water commercial/industrial applications other than for potable water.
This Limited Warranty does not include payment for any field labor to provide for normal maintenance including adjustments such as water stream height, water temperature or electric eye sensitivity. The water system and regulating valve are not covered by this Limited Warranty if they become inoperative due to liming, sand or similar residue. This Limited Warranty is voided if repairs are made by an unauthorized party or the serial number data plate is removed or defaced. Normal deterioration of finish due to use and exposure is not covered by this Limited Warranty. The Manufacturer is not liable for repairs, whether cosmetic or structural, to walls where cooler and packaged water coolers are built into the wall. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this water cooler to supply line pressures lower than 20 psi or higher than 105 psi is not covered by this warranty.
Write Your Own Review:
Questions & Answers
If you are a new customer, please register first: