Elkay Deluxe Wall Mount Bi-Level Drinking Fountain, 13.5 GPH - Stainless Steel
Ask a Question
About this Product
The Elkay Deluxe Wall Mount Bi-Level Drinking Fountain, 13.5 GPH - Stainless Steel (EWTLA14SK) is a self-contained, electric refrigerated, wall hung water cooler with a capacity of 50°F drinking water based upon 80°F inlet water and 90°F ambient. Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Meets UL requirements and all sanitary codes.
NOTE: Minimum 40 psi supply line pressure required in special circumstances where both sides of bi-level are in use simultaneously to ensure adequate stream height.
• Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
• Enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements.
• Removable front panel offers easy accessibility to interior. Cabinet design allows for flush to wall mounting.
• Exclusive Flexi-Guard Safety Bubbler
• NSF Compliant
• 665 Wattage
• 7.2 Full Load Amperage
• 14 GPH Flow Rate
• 115 Voltage
SECOND THROUGH FIFTH YEARS: The Manufacturer warrants the compressor and hermetically sealed refrigeration system, including cooling coils or tank assembly when part of the hermetically sealed refrigeration system, to be free from defects in material and workmanship under normal use for an additional four (4) years from the end of the one (1) year period described above. Packaged water chillers are not subject to the additional four (4) year warranty when used in chilled water commercial/industrial applications other than for potable water.
This Limited Warranty does not include payment for any field labor to provide for normal maintenance including adjustments such as water stream height, water temperature or electric eye sensitivity. The water system and regulating valve are not covered by this Limited Warranty if they become inoperative due to liming, sand or similar residue. This Limited Warranty is voided if repairs are made by an unauthorized party or the serial number data plate is removed or defaced. Normal deterioration of finish due to use and exposure is not covered by this Limited Warranty. The Manufacturer is not liable for repairs, whether cosmetic or structural, to walls where cooler and packaged water coolers are built into the wall. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this water cooler to supply line pressures lower than 20 psi or higher than 105 psi is not covered by this warranty.
Write Your Own Review:
Questions & Answers
If you are a new customer, please register first: