- Your Shopping Cart is empty.
Elkay LRPBM28K Drinking Fountain, 7.5 GPH Swirlflo Bi-Level Filtered - Stainless Steel
Earn 179 Westside Dollars for every 1 piece purchased.
The Elkay Swirlflo Architectural Series Bi-Level WaterSentry Filter water fountain - Stainless Steel (LRPBM28K) is the stylish and functional water dispenser you've been looking for. These water fountains come with the WaterSentry VII filter system, fully functional vandal-resistant front push buttons, 18 gauge type 304 nickel bearing stainless steel fountain body and front panel grill polished to a lustrous satin finish with high shined outer edge, 16 gauge type 304 tubular support arms, exclusive Flexi-Guard safety bubblers and flush wall mounting design. This water fountain is also equipped with a No-Lead design waterway system, and is completely ADA compliant.Model(s) MF200 Mounting Frame Is IncludedAdditional Information:
- 18 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge
- 16 gauge, type 304 tubular support arm incorporates unique recess to accept basin
- Contoured basin offers large strike area to minimize splashing
- Fully functional vandal-resistant front push button is easy to operate
- WaterSentry VII filter system
- Flexi-Guard safety bubbler uses a pliable polyester elastomer to prevent accidental mouth injuries and is keyed in location to prevent rotation
- Removable louvered ventilating grill encloses refrigeration unit and plumbing
- Meets adult and child ADA requirements
- Easy accessible thermostat is factory preset and requires only altitude adjustment
- Finish: 18 gauge, type 304 nickel bearing stainless steel polished to a lustrous satin finish with high shined outer edge
- WaterSentry VII filter system reduces cysts such as cryptosporidium and giardia by 99.99%
- Flow Rate: 7.5 gph
- Volts/Hertz: 115 V/60 Hz
- Base Rate: 7.5
- Rated Watts: 370
- Full Load Amps: 4
- GPH of 50°F Drinking Water: 70°F= 8.6, 80°F= 8.1, 90°F= 7.5
- Elkay Pressure-Type Water Coolers are designed to operate on 20 psi to 105 psi supply line pressure. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line
- Minimum 40 psi supply line pressure required in special circumstances where both sides of bi-level are in use simultaneously to ensure adequate stream height. Use ofwater filter in this situation is not recommended.Cooling System:
- Motor Compressor: Hermetically sealed, reciprocating type, 115 Volt/60 Hz, single phase that is sealed-in lifetime oil supply
- Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit: Combination tube-tank type, stainless steel, self cleansing, tube portion is continuous coil of copper tubing, fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing plastic material
- Refrigerant Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free operation.
- Temperature Control: Enclosed adjustable thermostat is factory pre-set. Requires no adjustment other than for altitude requirements. Easily accessible
- FIRST YEAR: The Manufacturer warrants every water cooler, packaged water chiller, fountain and accessory to be free from defects in material and workmanship under normal use for (1) year from date of installation or eighteen (18) months from date of shipment from the factory, whichever occurs first.
SECOND THROUGH FIFTH YEARS: The Manufacturer warrants the compressor and hermetically sealed refrigeration system, including cooling coils or tank assembly when part of the hermetically sealed refrigeration system, to be free from defects in material and workmanship under normal use for an additional four (4) years from the end of the one (1) year period described above. Packaged water chillers are not subject to the additional four (4) year warranty when used in chilled water commercial/industrial applications other than for potable water.
This Limited Warranty does not include payment for any field labor to provide for normal maintenance including adjustments such as water stream height, water temperature or electric eye sensitivity. The water system and regulating valve are not covered by this Limited Warranty if they become inoperative due to liming, sand or similar residue. This Limited Warranty is voided if repairs are made by an unauthorized party or the serial number data plate is removed or defaced. Normal deterioration of finish due to use and exposure is not covered by this Limited Warranty. The Manufacturer is not liable for repairs, whether cosmetic or structural, to walls where cooler and packaged water coolers are built into the wall. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line. Any damage caused by reason of connecting this water cooler to supply line pressures lower than 20 psi or higher than 105 psi is not covered by this warranty.
- Customer Reviews
- There are no reviews for this product yet. Be the first to review the product!
Write Your Own Review:
- Questions & Answers
- Please login or register before adding a question.