Elkay VRCTL8SC Drinking Fountain, 7.8 GPH Bi-Level Vandal Resistant - Stainless Steel
Ask a Question
About this Product
The Elkay VRCTL8SC stainless steel bi-level water fountain is built to be durable, making it a great water fountain for high demand use. These water dispensers come with heavy duty push button controls, series 300 stainless steel tops polished to a uniform bright luster finish, vandal-resistant bubblers, and flush wall mounting design. These water fountains are also equipped with a No-Lead design waterway system, and are completely ADA compliant. For a version of this model that is reversed (the right fountain is higher than the left), check out the Elkay VRCTLR8SC water fountain.
- Galvanized structural steel chassis supports fountain top and cabinet panels
- Series 300 stainless steel top polished to a uniform Elkay bright luster finish.
- Heavy duty push button control
- Vandal-Resistant heavy duty bubbler in a one piece construction, is keyed in location to prevent rotation and meets UL requirements and all sanitary codes
- Meets adult and child ADA requirements
- Easy accessible thermostat is factory preset and requires only altitude adjustment
- Frame: Galvanized structural steel
- Finish: Stainless steel
- Flow Rate: 8 gph
- Volts/Hertz: 120 V/60 Hz
- Base Rate: 7.8
- Rated Watts: 575
- Full Load Amps: 5
- GPH of 50°F Drinking Water: 70°F(21°C)= 9.4, 80°F(27°C)= 8.6, 90°F(32°C)= 7.8
- Elkay Pressure-Type Water Coolers are designed to operate on 20 psi (138 KPa) to 105 psi (724 KPa) supply line pressure. If inlet pressure is above 105 psi, a pressure regulator must be installed in the supply line
- Motor Compressor: Hermetically sealed, reciprocating type, 120 Volt/60 Hz, single phase that is sealed-in lifetime oil supply and equipped with electric cord and three prong molded rubber plug.
- Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated.
- Cooling Unit: Combination tube-tank type. Tube portion is continuous coil of copper tubing. Fully insulated with EPS foam which meets Underwriters Laboratories Inc. requirements for self-extinguishing material
- Refrigerant Control: Refrigerant HFC-134a is controlled by accurately calibrated capillary tube for positively trouble-free operation.
- Temperature Control: Enclosed adjustable thermostat is factory pre-set. Requires no adjustment other than for altitude requirements. Easily accessible
Write Your Own Review:
Questions & Answers
If you are a new customer, please register first: