Fantech FR110 Centrifugal Inline Exhaust Fan, 167 CFM - for 4" Duct
Ask a Question
About this Product
The Fantech FR110 is an economical choice to add additional airflow through your 4” ductwork. The Fantech FR110 boasts 167CFM of power and is designed of the heaviest duty construction for many years of solid use. The versatile FR series by Fantech features a UV-protected shell casing that is forged from UL-recognized thermoplastic resin to add strength while reducing overall weight. The Fantech FR110 167 CFM Centrifugal Inline Fan is designed to be mounted outdoor and is suitable for wet conditions. The housing, is completely sealed and caulked to prevent moisture from entering the housing. The Fantech FR has been used for many years as an industry standard by commercial and residential contractors, and is UL listed for safety.
The Fantech FR110 Centrifugal Inline Fan for 4" Duct is most commonly used for multiple point exhaust configurations, new room additions, or dual bathroom exhaust.
Features:• Easy to install. Loaded with features. |
• Fits 4" Diameter Duct
• Prewired and Supplied with a Mounting Bracket for Easy Installation
• Tested and Approved by UL and CSA
• Approved for Residential and Commercial Applications and for Wet Locations
• Suitable for Air Stream Temperatures Up to 140° F
• Easy Connection using External Wiring Box with Waterproof Gasket
• 100% speed controllable
• Five-year factory warranty
Specifications:• CFM: 167|
• Duct Diameter: 4"
Write Your Own Review:
Questions & Answers
How do I wire this fan?
The wiring information for the Fantech FR110 Centrifugal Inline Exhaust Fan is located here: http://www.fantech.net/FR-110_enus-411331.aspx
Is the FR110 suitable for dryer exhaust and does it have a auto/on when the dryer is on? Also does it come with a mounting kit?
The Fantech FR110 does not have the sensing capability to automatically turn on / off as your dryer runs, however, Fantech does manufacture a few models that are more suitable.
The best options, are the Fantech DBF4XL (click here to view) or the Fantech DBF110 (click here to view) which are specifically designed for your application. These models incorporate a pressure sensing switch that will automatically turn the fan on or off based on the air pressure received by your dryer. These models also come with mounting hardware and can be mounted anywhere along the line of the vent. They will work with your standard 4" dryer vent.
If you are a new customer, please register first:
You may also be interested in the following products: