What is Dimming Control?

Lutron dimmers use tinned copper wires on some of our products. These wires are silver in color as a result of the tinning process. Tinned copper wires are compatible with copper wiring and wire nuts. Lutron dimmer uses tinned copper wires to avoid stray strands and to make our products easier to install.

0 0

First, confirm there is no ground wire by asking yourself the following questions: - Is the wallbox metal? If the answer is no, it's plastic, there should be a ground. - Is there a screw in the metal wallbox with a bare copper wire under it? If the answer is yes, attach the dimmer ground wire under the screw as well.If you feel confident that there is no ground wire, then - To meet safety regulations, cap or remove the ground wire or screw and install the unit with a plastic, non-combustible, UL...

0 0 View More

Yes, a 3 way dimmer will replace one of the 3 way switches. A 4 way circuit can be dimmed from all switch locations by using a Multi-Location dimmer and 2 Accessory Dimmers such as Maestro, Spacer, Spacer System or Faedra.

0 0

       Yes we do.  Keep in mind that only Advance Mark 10 ballasts should be dimmed and all other products may work, but void the manufacture warranty.  Using a dimmable dimmer on a Fluorescent fixture without consulting a certified technician is the volition of the user, and not Westsidewholesale.     That being said, if you want to dim your florescent fixtures, use the following dimmers;NovaNova TRadio TouchMicro WAttGRAFIK EYE 3000Di...

0 0 View More

When dimmers are in the same wallbox, they are considered "ganged". To install ganged dimmers, simply remove the dimmer side sections from the heat sink (side tabs). The maximum wattage capacity for each dimmer is reduced (derated) so that the dimmer does not overheat.

0 0