My thermostat is reading in Celsius. How do I change it to Fahrenheit?

There is no need to select a time to stop a programming period. Starting a new programming period will stop the previous program period.

0 0

Because of their safe design, Warmrails can operate 24 hours a day at the factory set temperature, using less electricity than a regular light bulb! You can operate a Warmrail using a timer if you wish, but most people find the comfort and convenience of Warmrails so appealing that they run them continually. We do not provide temperature controls, since Warmrails are designed to operate to the optimum performance level.

0 0

With a 5 day - 2 day, Mon - Fri settings are the same and Sat/Sun can be another separate setting for the weekend.

1 0

Yes. Some heaters have built in thermostats, but they can either be removed or inactivated. Remote thermostats can be located so that they are more convenient to adjust than the built in one. Located across the room from the heater, they will also insure that the heater runs long enough to heat the whole room. This is especially true in an odd shaped room where air does not flow readily from one section to another.

0 0

Single pole thermostats break only one side of the power line to your heater and cannot be turned “off”. Therefore, power is continuous to the heater even if it is not running. The control knob will have a low temperature setting without an “off” position. Double pole thermostats break both sides of the power line; therefore all power to the heater is interrupted. The control knob will have an “off” position.

0 0