Fluke 773 Milliamp Process Digital Clamp On Meter - Advanced Process

SKU: 133055
Brand: Fluke Model: 773 Condition: New

Fluke 773 Clamp-On Meter

Our Price: $1,199.95
+ FREE Shipping

Ask a Question
About this Product

Purchase 1 piece, and earn 158 Westside Dollars

View All Fluke Electrical Testing Equipment

Description

Fluke 773 Milliamp Process Clamp On Meter with Advanced Process measure mA signals without breaking the loop. The Fluke 773 mA Clamp Meter is Fluke’s premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power. If you are spending time taking mA measurements by removing a wire and breaking the loop, calling the control room to isolate a loop, testing analog input/output on a console, troubleshooting devices with mA inputs and outputs, repairing intermittent or erratic 4-20 mA loops, going back to the shop to get extra tools then you to take a good look at the Fluke 773 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Fluke Meter includes: Four AA alkaline batteries (installed), Soft carrying case, TL75 test leads, AC 72 detachable clip, TL 940 mini hook test leads, Instruction sheet, Hanging tool with hook and loop strap.


Features:• Clamp On Meter includes: Four AA alkaline batteries (installed), Soft carrying case, TL75 test leads, AC 72 detachable clip, TL 940 mini hook test leads, Instruction sheet, Hanging tool with hook and loop strap, Automatically change the voltage output for remote testing
• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity
• Measure 4 to 20 mA signals without breaking the loop
• Measure mA signals for PLC and control system analog I/O
• Dual backlit display with both mA measurement and percent of 4 to 20 mA span
• Measurement Spotlight illuminates hard to see wires in dark enclosures
• Detachable clamp with extension cable for measurements in tight locations
• Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
• Automatically change the 4 to 20 mA output for remote testing
• Power saving features, auto-off, backlight timeout extend battery life
• Hold function captures and displays changing measurements
• Measure 4 to 20 mA signals with in-circuit measurement
• Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
• Source 4 to 20 mA signals for testing control system I/O or I/Ps
• mA output linear ramp or 25% step output
• Automatically change the 4 to 20 mA output for remote testing
• DC voltage measurement to verify 24V power supplies or voltage I/O signals
• Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
• Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
• Enables milliamp signal logging to a separate logging device without breaking the loop
• Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
• mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
• Apply a mA input signal to a device and measure its 4-20 mA output on devices such as valves or mA isolators
• Voltage output linear ramp or 25% step output
Specifications:• Model Number: 773
• Item Number: 3362365
• Diameter of measurable conductor: 0.177 in or 4.5 mm max
• Operating temperature: -10 to 50 °C
• Storage Temperature: -25 to 60°C
• Operating Humidity: < 90% @ <30 °C, < 75% @ 30 to 55°C
• Operating Altitude: 0 to 2000 m
• IP Rating: IP 40
• Size: 44 x 70 x 246 mm (2 7/8 x 5 3/4 x 11 5/8 in)
• Weight: 410 g, (14.4 oz)
• Vibration: Random 2 g, 5 to 500 Hz
• Shock: 1 meter drop test (except the jaw)
• EMI/RFI: Meets EN61326-1
Note: For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m
• Temperature Coefficient: 0.01% °C (<18°C or > 28°C)
• Power, battery life: (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
• Warranty: Three years for electronics, one year for cable and clamp assembly
• mA measurement (Measured by clamp) Resolution and Range: 0 to 20.99 mA
• mA measurement (Measured by clamp) Accuracy: 0.2%+2 counts
• mA measurement (Measured by clamp) Resolution and Range: 21.0 mA to 100.0 mA
• mA measurement (Measured by clamp) Accuracy: 1% + 5 counts
• mA measurement (Measured in series with test jacks) Resolution and Range: 0 to 24.00 mA
• mA measurement (Measured in series with test jacks) Accuracy: 0.2% + 2counts
• mA source (Maximum mA Drive: 24 mA into 1,000 ohms) Resolution and Range: 0 to 24.00 mA
• mA source (Maximum mA Drive: 24 mA into 1,000 ohms) Accuracy: 0.2% + 2counts
• mA simulate (Maximum voltage 50 V dc) Resolution and Range: 0 to 24.00 mA
• mA simulate (Maximum voltage 50 V dc) Accuracy: 0.2% + 2counts
• Voltage source (2 mA maximum drive current) Resolution and Range: 0 to 10.00 V dc
• Voltage source (2 mA maximum drive current) Accuracy: 0.2% + 2counts
• Voltage Measure Resolution and Range: 0 to 30.00 V dc
• Voltage Measure Accuracy: 0.2% + 2counts

Customer Reviews

There are no reviews for this product yet. Be the first to review the product!

Write Your Own Review:

 1 star2 stars3 stars4 stars5 stars
Price
Value
Quality



Submit Review

Questions & Answers

Please login or register before adding a question.

If you are a new customer, please register first: