Genie Pro Intellicode Compact Garage Door Remote Control - 1-Button Transmitter
This item is no longer availableFor your convenience, we recommend:
Genie G3T-BXView this item
• One button remote
• Keychain feature
• Part Number: 36484S
• Includes: 12V Battery, Visor Clip, and Instructions
Write Your Own Review:
Questions & Answers
how do I program this remote GICT 390-1
This information is taken from Genie's programming instructions:
To successfully program your remote, you must have it within frequency range of your Genie opener.
Then, follow these simple steps for most models (consult your owner's manual for specific instructions for your model):
Locate the "Learn Code" button and LED indicator. Depending on the model of garage door opener you own, "Learn Code" is typically located near the antenna of the unit.
Press and release "Learn Code"; the LED indicator will blink at a rate of twice per second. Press and release the button on the remote you want to program; the LED indicator will flash or glow steadily (varies by model). Press the same remote button again; the LED indicator will go out.
To check that the button has been programmed correctly, press the button on the remote again; the door should operate. If it does not, carefully repeat the steps above. And remember to clear all people, pets, ladders, vehicles and other obstructions from the garage door’s path before activating.
Repeat the steps above for multiple doors and/or remotes with multiple buttons.
Up to seven remote-operated devices can be programmed into one of the Genie legacy Intellicode garage door openers. That includes a total of seven Intellicode remotes or six Intellicode remotes plus an Intellicode wireless keypad. HomeLink programming would claim one of the available memories if desired. Newer DC units can hold 28 remote devices and newer AC units can hold up to 30.
If you are a new customer, please register first: