Sold out
DescriptionThe Gardner Bender SPD-813 is a 3/4" punch and die set for 35-ton punch. There are models available with 1/2", 3/8" and 5/8" sizes.Featu...
View full details
Sold out
DescriptionThe Gardner Bender SPD-688 is a 5/8" punch and die set for 35-ton punch. There are models available with 1/2", 3/4" and 3/8" sizes.Featu...
View full details
Sold out
DescriptionThe Gardner Bender SPD-563 is a 1/2" punch and die set for 35-ton punch. There are models available with 3/4", 3/8" and 5/8" sizes.Featu...
View full details
Sold out
DescriptionThe Gardner Bender SPD-438 is a 3/8" punch and die set for 35-ton punch. There are models available with 1/2", 3/4" and 5/8" sizes.Featu...
View full details
Sold out
DescriptionThe Gardner Bender SP-7 is a stud punch with spring release. This model is designed to punch 7? 8" holes for 1? 2" or 1-11? 32" for 3? 4...
View full details
Sold out
DescriptionThe Gardner Bender SP3500 is a 35-ton steel, hydraulic punch set. This model is designed to punch small and clean conduit holes in raili...
View full details
Sold out
DescriptionThe Gardner Bender KW52 is a knockout hand ratchet wrench in red.FeaturesRed handle wrenchSpecificationsWeight: 1 lbs.
Sold out
DescriptionThe Gardner Bender KSS520A is a 1/2-2" hydraulic knockout set. This model is made of stainless steel and is available in different sizes...
View full details
Sold out
DescriptionThe Gardner Bender KSS520 is a 1/2-2" hydraulic knockout set. This model is made of stainless steel and is available in different sizes ...
View full details
Sold out
DescriptionThe Gardner Bender KSS50125 is a 1/2" - 1 1/4" mechanical knockout set. This model is made of stainless steel and is available in differ...
View full details
Sold out
DescriptionThe Gardner Bender KSN3540 is a 3-1/2" - 4" mechanical drive screw and nut. This model is available in different sizes to specifically p...
View full details
Sold out
DescriptionThe Gardner Bender KSN2530 is a 2-1/2" - 3" mechanical drive screw and nut. This model is available in different sizes to specifically p...
View full details
Sold out
DescriptionThe Gardner Bender KSB50B is a 1/2" bearing and drive screw. This model is available in different sizes to specifically permit easy and ...
View full details
Sold out
DescriptionThe Gardner Bender KSA50 is a pull stud adapter. This model is specifically designed for pull stud KPS50.FeaturesMade of rugged and dura...
View full details
Sold out
DescriptionThe Gardner Bender KS752B is a 3/4" - 2" mechanical drive screw with bearing. This model is made of stainless steel and is available in ...
View full details
Sold out
DescriptionThe Gardner Bender KS3540 is a 3 1/2" - 4" mechanical knockout drive. This model is made of stainless steel and is available in differen...
View full details
Sold out
DescriptionThe Gardner Bender KPS750 is a 3/4" Super Slug-Out ™ punch. This model is made of stainless steel and is available in different sizes to...
View full details
Sold out
DescriptionThe Gardner Bender KPS500 is a 1/2" Super Slug-Out ™ punch. This model is made of stainless steel and is available in different sizes to...
View full details
Sold out
DescriptionThe Gardner Bender KPR7540 is a pull rod draw stud. It is designed to be used with 3/8-inch - 2.5 inch dies and punches.
Sold out
DescriptionThe Gardner Bender KPS2000 is a 2" Super Slug-Out™ punch. This model is made of stainless steel and is available in different sizes to s...
View full details
Sold out
DescriptionThe Gardner Bender KPS1500 is a 1 1/2" Super Slug-Out™ punch. This model is made of stainless steel and is available in different sizes ...
View full details
Sold out
DescriptionThe Gardner Bender KPS1250 is a 1 1/4" Super Slug-Out™ punch. This model is made of stainless steel and is available in different sizes ...
View full details
Sold out
DescriptionThe Gardner Bender KPS1000 is a 1" Super Slug-Out™ punch. This model is made of stainless steel and is designed to be used with KSS520 a...
View full details
Sold out
DescriptionThe Gardner Bender KPR7540 is a pull rod draw stud. It is designed to be used with 3/4-inch - 4-inch dies and punches.Specifications Dia...
View full details