Greenlee 1810 Little Kicker Offset Bender for 1/2" EMT
Ask a Question
About this Product
Electrical wok presents enough challenges without having to waste time and struggle with bending conduits around obstacles. That’s why Greenlee has developed the Greenlee 1810. The ½ inch EMT offset bender makes bending conduit easy and fast. To offset the conduit you simply have to insert the conduit, depress and the handle on the bender and then remove the conduit.
With the Greenlee’s offset bender, you can make repeat offsets again and again. To save on time and make the job easier, the Greenlee 1810 Little Kicker Offset Bender will make identical offsets time after time for any wall-mounted boxes that contain exposed conduits. The Greenlee 1810 Little Kicker Offset Bender will also make an offset that matches the knockout in box. The Greenlee Little Kicker Offset Bender has a maximum offset of .56 inches. Pick up yours today and make your next job that much easier!
Features:• Bends offsets in one easy operation. Insert conduit, depress handle, release and remove conduit|
• Makes identical offsets every time for wall mounted boxes with exposed conduit
• Creates offset that matches the knockout in box
• Maximum offset of .56" (9/16)
Specifications:• Model Number: 1810|
• Capacity: 1/2" EMT
• Weight: 8.75 lbs. (4 kg)
Write Your Own Review:
Questions & Answers
The greenlee 1800 offset emt bender..... Will it do both 1/2 and 3/4 or do you have to buy a separate one for each pipe size?
Capacity: 1/2" EMT. A separate unit would be needed for a 3/4 pipe size.
If you are a new customer, please register first:
You may also be interested in the following products: