- Your Shopping Cart is empty.
Halo 3009SNBB 3" Adjustable Gimbal Trim in Satin Nickel with Black Baffle
Get 10% Cashback in Westside Dollars
If your home is without task lighting, look into the Halo 3009SNBB 3" gimbal trim, satin to remedy your situation today! Instead of using your overhead lighting system for menial, mundane activites that require very little light, investing in a Halo 3" gimbal trim light like this one could save you time, money and make your task more enjoyable.
With the Halo 3009SNBB 3" gimbal trim satin your possibilities span far beyond normal task and accent lighting. Because of the full 360 degree rotation of the fixture and an additional 35 degree positive tilt and 15 degree negative tilt, you can illuminate parts of your home that were previously unlit, simply because of their location. With a Halo Recessed Trim light, this type of angular accent lighting has become more and more popular in modern homes.
The three pressure springs of this Halo recessed trim also keep your fixture firmly in place, allowing no movement or air transference. This not only keeps the Halo 3009SNBB 3" gimbal trim in top condition, but also cuts down on your energy bill.
The Halo 3" gimbal trim is designed for use with the following Halo H3 small aperture housings:
Line Voltage Housing (for 120V GU10 lamps). For 2 x 6 Construction:
- H36ICAT 50W IC Air-Tite Housing
- H36TAT 50W Non-IC Air-Tite Housing
- H36RTAT 50W Non-IC Air-Tite Remodel Housing
Low Voltage Housing (for 12V MR16 lamps). For 2 x 6 Construction:
- H36LVICAT 50W IC Air-Tite Housing
- H36LVTAT 50W Non-IC Air-Tite Housing
- H36LVRTAT 50W Non-IC Air-Tite Remodel Housing
- H36LVTAT277 50W Non-IC Air-Tite Housing, 120/277V
- H36LVRTAT277 50W Non-IC Air-Tite Remodel Housing, 120/277V
Line Voltage Housing (for 120V GU10 lamps). For 2 x 8 Construction:
- H38ICAT 50W IC Air-Tite Housing
Low Voltage Housing (for 12V MR16 lamps). For 2 x 8 Construction:
- H38LVICAT 50W IC Air-Tite Housing
- 35 deg Tilt and 360 deg Rotation to Direct Light where it is Needed
- Can be Used with 12V or 120V Housings
- Three Pressure Springs Ensure Positive Retention in Housing
- Trim Includes Cover Glass Lens which May be Replaced with a Variety of Media
- Trim Finish: Satin Nickel• Baffle: Black• Lamping: 120V GU10, 12V MR16• Housings: H36ICAT, H36TAT, H36RTAT, H36LVICAT, H36LVTAT, H36LVRTAT, H36LVTAT277, H36LVRTAT277, H38ICAT, and H38LVICAT• Gimbal Diameter: 2 3/4"(70mm)• Outer Diameter: 4 1/4"(108mm)
- One (1) year through the manufacturer
- Customer Reviews
Write Your Own Review:
- Questions & Answers