- Your Shopping Cart is empty.
Halo 3009TBZBB Recessed Lighting Trim, 3" Adjustable Gimbal Ring Trim - Tuscan Bronze with Black Baffle
Earn 4 Westside Dollars for every 1 piece purchased.
The Halo 3" Trim with Adjustable Gimbal - Tuscan Bronze with Black Baffle is suitable for your recessed lighting installation, new or old, and will fit most standard housings. Adding recessed trims to your Recessed Lighting will add the final touch of class you've been wanting. This 3-Inch trim piece, with a Bronzefinish, will work For 12V / 120V Housing. Please contact us if you have any questions about adding this trim to your existing lighting installation, our staff can assist you to make sure you order the correct trims for your housings. Adjustable gimbal ring trim uses MR16 low voltage or GU10 line voltage lamps ideal for accent and task lighting. Trim offers 35 degree tilt and 15 degree reverse tilt and 360 deg rotation. Designed for use with 3" small aperture line and low voltage housings.
3009 is designed for use with the following Halo H3 small aperture housings:
Line Voltage Housing (for 120V GU10 lamps). For 2 x 6 Construction:
- H36ICAT 50W IC Air-Tite Housing
- H36TAT 50W Non-IC Air-Tite Housing
- H36RTAT 50W Non-IC Air-Tite Remodel Housing
Low Voltage Housing (for 12V MR16 lamps). For 2 x 6 Construction:
- H36LVICAT 50W IC Air-Tite Housing
- H36LVTAT 50W Non-IC Air-Tite Housing
- H36LVRTAT 50W Non-IC Air-Tite Remodel Housing
- H36LVTAT277 50W Non-IC Air-Tite Housing, 120/277V
- H36LVRTAT277 50W Non-IC Air-Tite Remodel Housing, 120/277V
Line Voltage Housing (for 120V GU10 lamps). For 2 x 8 Construction:
- H38ICAT 50W IC Air-Tite Housing
Low Voltage Housing (for 12V MR16 lamps). For 2 x 8 Construction:
- H38LVICAT 50W IC Air-Tite Housing
- 35 deg Tilt and 360 deg Rotation to Direct Light where it is Needed
- Can be Used with 12V or 120V Housings
- Three Pressure Springs Ensure Positive Retention in Housing
- Trim Includes Cover Glass Lens which May be Replaced with a Variety of Media
- Trim Finish: Tuscan Bronze
- Baffle: Black
- Lamping: 120V GU10, 12V MR16
- Housings: H36ICAT, H36TAT, H36RTAT, H36LVICAT, H36LVTAT, H36LVRTAT, H36LVTAT277, H36LVRTAT277, H38ICAT, and H38LVICAT
- Gimbal Diameter: 2 3/4"(70mm)
- Outer Diameter: 4 1/4"(108mm)
- One (1) year through the manufacturer
- Customer Reviews
- There are no reviews for this product yet. Be the first to review the product!
Write Your Own Review:
- Questions & Answers
What type of bulbs are these? Do they come with LED?by Terri G. on 12-22-2014
These are not bulbs, these are trims to cover Halo lighting cans.The bulb you use depends on the model number of the can you have or are going to install.on 01-02-2015
Can these lights be used in new construction and can they be used outside in a porch location?by Roy B. on 05-12-2012
Yes, these trim rings are suitable for new construction or remodel applications. This trim ring is attached after the housing is installed to provide a finished look. The light bulb is then installed into the gimbal ring trim. This trim works with 3" housings and has 3 retention springs / clips to secure to the housing.
Use outdoors will depend on the conditions. This trim is not intended for contact with moisture so it may prematurely have issues with the finish. The warranty may also be voided.on 05-15-2012Please login or register before adding a question.