Halo H1T Recessed Lighting Can, 9" 100W Max Square Line Voltage Non-IC Housing - for New Construction
Ask a Question
About this Product
The Halo H1T 9" Line Voltage Square Incandescent New Construction Non-IC Housing is a versatile 8 1/2" square aperture fixture that is designed for use with A19 100W incandescent lamps. The Halo H1T 9" Line Voltage Square Incandescent New Construction Non-IC Housing comes complete with a plaster frame, built-in aluminum reflector, and feedthrough junction box. There are a large variety of trim style available for the Halo H1T 9" Line Voltage Square Incandescent New Construction Non-IC Housing. The Halo H1T 9" Line Voltage Square Incandescent New Construction Non-IC Housing is ideal for both commercial and residential applications. The Halo H1T 9" Line Voltage Square Incandescent New Construction Non-IC Housing offers economical housing choice with square trims.
- Non-IC Housing
- Can be used in insulated ceilings but insulation MUST be kept 3" from all sides of the fixture
- Thermally protected
- Wide selection of lensed trims
- For use with 120V incandescent lamps
- Aperture: 8-1/2" [216mm]
- Height: 5" [127mm]
- Length: 12-1/2" [317mm]
- Width: 9" [298mm]
Write Your Own Review:
Questions & Answers
I need to replace an exixting Halo light fixture recessed in the eave of my home. It is rectangular fitting into a inside opening 10" sqUARE. The trim needs to be at over 10" to cover opening. Does this fixture cover that opening.
No, this is a 9" square fixture which works with 9" square trims.
i think the ht1 housing is what i need. what i need is the socket housing and a new trim but i cant see the socket housing well enough. i also cant find the part number on the old housing but this looks like the one. is there a way to show me another picture of this?thank you
New pictures of the housing were added.
If you are a new customer, please register first:
You may also be interested in the following products: