Halo H99ICAT 4" Recessed Light Housing, Airtight for New Construction
Ask a Question
About this Product
The Halo H99ICAT 4” Recessed Housing is for New Construction featuring a small aperture IC AIR-TITE housing that can be used to provide task and accent lighting. The H99ICAT was designed to be used in insulated ceilings where insulation will be in direct contact with the housing. It is an AIR-TITE housing that has been designed to prevent air flow between unconditioned areas and living spaces.
The Halo H99ICAT 4” Recessed Housing has been designed to be easily installed while still offering the flexibility across a variety of materials and situations. The hanger bars are included and they come with pre-installed nails (self-tapping screws are also available) in special housings that offer smooth, direct penetration into all types of materials such as laminated composites, open-web joist plates, engineered I-joists, as well as frozen lumber. The Halo H99ICAT 4” Line Voltage New Construction IC Rated Recessed Housing features automatic leveling flanges that allow the housing to be held securely in place with one hand while you drive the nails in with your other hand. The Halo H99ICAT 4” Line Voltage New Construction IC Rated Recessed Housing also includes T-bar clips that can be used when you are installing it into suspended ceiling T-grid systems.Designed for Incandescent Lighting.
- For use in insulated ceilings
- Can make direct contact with insulation
- AIR-TITE® housing prevents airflow between living space and attic
- Aluminum construction allows the housing to dissipate heat
- Ceiling Opening: 4 3/8 inches diameter
- Height: 5.50 inches
- Length: 12 inches
- Width: 5.25 inches
- Materials: Galvanized Steel Plaster Frame
- Collection: H99
- Voltage: 120 volt
- UL listed for damp location
Write Your Own Review:
Questions & Answers
can the H99ICAT be on a dimmer?
Yes. This housing has to be used with a line voltage dimmer to operate tho.
What is the recommened bulb for this product?
The Halo H99ICAT is designed for Incandescent lighting, however, with the release of recent LED retrofit light bulbs, youcan use LED bulbs in fixtures designed for Incandescent lighting.
If you are a new customer, please register first: