- Your Shopping Cart is empty.
Hayward SPX0580Z2 Pool Light Lens Gasket, Special High Temperature
Earn 1 Westside Dollar for every 1 piece purchased.
The Hayward SPX0580Z2 Lens Gasket helps to prevent corrosion if replaced regularly. It is used to keep the bulb clean and water out of the lens. Remember when replacing your pool or spa light bulb it is very important to replace the lights lens gasket. After long use, heat, and harsh chemicals, the old gasket is probably compressed, and if it doesn't fail immediately, it might fail before the next bulb change.
- Molded Lens Gasket
- Helps prevent corrosion of pool lens area
- Model: SPX0580Z2
- Color: Black
- Limited Lifetime through manufacturer
- Customer Reviews
- There are no reviews for this product yet. Be the first to review the product!
Write Your Own Review:
- Questions & Answers
how do you assemble the gasket over the lens and light fixture to ensure a proper seal?by kennith B. on 06-26-2012
Once the light is removed, and the needed screws and / or clamps are freed from the lens and trim, you will have access to the bulb. Once you have replaced the bulb, install the new gasket (in the same place as the old gasket) when re-attaching the lens and trim. Once the gasket is in place, you should be able to simply re-screw / clip the front portion, ensuring a solid seal. If the gasket does not seal, there may be corrosion, or other issues that are limiting the fixture from obtaining a good seal.
Due to the fact that pool lighting involves special practices when installing and testing, it is recomended that a pool professional provide the servicing to ensure safety and long-term quality of the installation.
For Installation Instructions and further details regarding Hayward Underwater Pool Lights, refer to the follwoing PDF Installation Guideon 06-26-2012Please login or register before adding a question.