Offered at Westside Wholesale, a large selection of Duct Clamps allows you to choose the best possible option for your home’s ducting. The models include Duct Stabilizing and Duct Noise Reduction Clamps of the most common diameters: 4”, 6”, 8” and 10”. This way, every customer is able to find the Duct Clamp to install it in both residential and commercial duct systems.
The most noticeable advantages of such clamps are their capacity to reduce noise. Thanks to Duct Clamps offered at Westside Wholesale and their unique design, the hindering noise coming from rigid duct work can be reduced and oftentimes suppressed. This is possible because each item you see in this section uses vibration resistant clamps. When air flows through the duct, it always shifts and makes noise, unless duct parts are correctly mounted with secure hardware that makes this noise go away.
Westside Wholesale offers the best solutions to stabilize the duct work of any house, office or commercial building. Duct Clamps you see in this section are made from galvanized steel that is supplemented with neoprene material. Such combination provides increased resistance to vibrations and eliminates the noise from rigid duct work. In addition, neoprene inserts of such devices also prevent rattles that oftentimes come from loose ducts.
The features of Duct Clamps offered at Westside Wholesale include high quality galvanized steel from which the bands are made, additional neoprene material that provides proper vibration isolation, stabilizing mounting clamps for enhanced protection, compatibility with rigid duct work and ability to be used during suspended Installation of fans.
As you can see, such compact items provide huge benefits for every system they are installed in. Westside Wholesale, in its turn, offers reasonable prices, additional discounts and fast shipping for every Duct Clamp you select and purchase. All you have to do is spend five minutes on adding Duct Clamps to your virtual cart and proceeding to check out.
Fantech 6" Duct Noise Reduction Mounting Clamps
to get 5% Off this Item!
How to Select
How to select Duct Clamps
Duct clamps serve to connect and secure the unions of flexible duct with various types of fittings and applications. Such small item guarantees the impermeability of the entire ventilation by sealing the gaps and holes between duct fittings. Selecting a duct clamp is easier than you might think but there are factors that require your attention.
First and foremost, it’s important that you know the clamps’ size or diameter. There is a rule that should be followed when installing such items—a duct clamp should be one size bigger than the flexible ducting and adapters you are willing to connect. Always remember to follow this rule; otherwise you will have a hard time fitting a duct clamp with the ducting of the same diameter.
The next factor to consider when selecting a duct clamp is the materials that they are made from. Various types of clamps are made from stainless steel, polyester or fiberglass. While the last two types are perfect for indoor installations, steel duct clamps offer longer service and resistance to temperature and pressure. In addition to that, steel provides flexibility that could really help you during installation.
The most common duct clamp sizes are 4, 6, 8 and 10”. These diameters are compatible with most conventional applications and flexible duct. In case you need a clamp of a smaller diameter and can’t seem to find it anywhere, select the one that has the nearest size and use a piece of rubber during its installation. This will help you reduce the actual size of the clamp and ensure the application is properly mounted.
Steel duct clamps are perfect to be used with ducting of the similar material. However, when two completely different materials come into close contact, some of them may show signs of corrosion. Before you buy the clamps, always verify that they won’t come into a reaction with the material of the application or duct work.
The price of such products is oftentimes the decisive factor when it comes to purchasing. There’s no need to look for duct clamps based on their price, though. The industry’s top brands have countless options to choose from in a variety of different price ranges. Not only that, at Westside Wholesale we only provide customers with top-of-the-line products at an affordable price. You might think that purchasing cheap duct clamps is a good way to go, but this isn’t actually a good idea as you will only end up spending more money in the long run. Always pay attention to quality and compatibility first and then proceed to other factors.