Moen Eva Series Two Handle High Arc Bathroom Faucet, Chrome - Wholesale Packaging

Product Information:

About The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet, Chrome - Wholesale Packaging

The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet features an elegant, transitional design that will provide timeless appeal to your bathroom.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet also features sophisticated, tapered lines that offer an appearance that never goes out of style.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet has a chrome finish that provides a bright, reflective cool gray metallic appearance.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet has an easy to use two handle lever design.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet has a four inch centerset design that is used in three hole installations.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet is ADA compliant and meets ab 1953 (California and s152 (Vermont) legislation.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet meets the WaterSense criteria to conserve water while not sacrificing on performance.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet has an aerated flow that provides a constant, uninterrupted stream of water.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet has a pop-up drain assembly that is made up of 50% plastic and 50% metal.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet uses 1/2" IPS connections.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet is shipped in wholesale packaging and not retail packaging.  The Moen 66410 Eva Series Two Handle High Arc Bathroom Faucet is backed by a limited lifetime manufacturer warranty.

Additional Information:

Specification Sheet

Owner's Manual

Illustrated Parts View

Features:

• Beautiful Chrome Finish
• Easy To Use Two Handle Lever Design
• Meets AB1953 (California) & S152 (Vermont) Legislation
• ADA Compliant

Specifications:

• Model: 66410
• Finish: Chrome
• 1/2" IPS connections
• Dimensions: 3-7/8" Deck to the top of the handle; 6-3/16" Deck to the highest point of the faucet; 4-1/4" Deck to the spout opening; 4" Back of the spout to the middle of the spout opening
• Installation: Three 1" diameter holes, four inches on center
• Includes metal pop-up waste assembly
• Lever style handles
• Maximum handle(s) rotation angle is 90 degrees to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
• 1224 cartridge design
• Nonmetallic and stainless steel material
• Third party certified to WaterSense, CSA B125.1, ASME A112.18.1, ANSI A117.1, and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA Compliant
• Lifetime limited warranty against leaks, drips and finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations