Pentair 262506 1.5" Tagelus Backwash Valve For Top Mount Sand Filter
Ask a Question
About this Product
Pentair 262506 1.5" Backwash Valve For Top Mount Sand Filter is designed for maximum sand filter backwash performance and precise water flow. All top mount multiport valves are constructed of molded ABS material with heavy-duty plastic handles and are 100 percent factory tested. Universal Configuration has threads on both the inside and outside of the inlets and outlets
The Pentair 262506 will fit ALL Tagelus Models except TA100
• Wear Resistant Rotor
• ABS Body
• 100 Percent Factory Tested
• Large, 1-Piece Durable Lever Handle for Trouble-Free Operation
• 6-Position Clamp, Positive-Lock Operation
• Heavy-Duty Diverter
• Special Winterizing Position
• TA 30/40/50/60D
Write Your Own Review:
Questions & Answers
Show per page:
I have a TA60D with a multiport valve as shown above. In our installation, however, the 1-1/2" pipe looks to be threaded "into" the inlet, return, and waste ports. (as opposed to using the external threads of the ports. As it can't be seen in the item photo, do the ports on this valve also have threads on the inside as well?
This multi-port valve has threads both on the inside and outside of the inlets and outlets. The piping diameter is 1.5 inches.
do you have gauge for this valve
Replacement parts for this valve are not currently available. The Penatir 262506 is sold a s complete unit, the gauge is included with the completed unit.
With pool equipment, due to high pressure in the plumbing, it is recommended that the valve be replaced entirely to ensure proper working order and long-lasting operation.
My pentair tagelus TA60D is about 6 years old with 1 1/2 in , will 2262506 work?
Yes, this is designed to work with Tagelus TA60 models
the part number on my old valve is 272523 will the 262506 valve work in its place
Yes, this is the correct part.
Has the Pentair 262506 also been updated to work with a tagelus ta-50 with a 1.5" input manufactured in 2004?
Yes, the item above will work with the Tagelus ta-50.
Do you have a multiport valve that will work for a tagelus ta-60? It was purchased in 2000. The model listed above looks exactly like the one on my filter, but based on the q/a above it apparently is not compatible with my filter.
After speaking with a representative at Pentair, the Pentair 262506 has been updated to work with the Tagelus TA-60, using a 1-1/2" input (previously for tagelus models prior to 1991).
For a 2" input, you will need model # 261185, which is the same valve configuration, except with a wider input.
If you are a new customer, please register first:
You may also be interested in the following products: