- Your Shopping Cart is empty.
S.R. Smith 75-209-5866 Slide Deck Aluminum Anchor Flange Kit
Get 10% Cashback in Westside Dollars
The machined aluminum Anchor Flange Assembly (75-209-5866) provides a suitable mounting point when surface mounting light to moderate duty residential and light duty commercial equipment whose outer diameter tubing is 1.90" (48.3mm). The base is symmetrically pre-drilled to accept four mounting bolts of a diameter of 1/4" (.25"/6.35mm) (not included). In addition, either side of the mounting tube is pre-drilled at approximately 1" (25.4mm) below the top of the mounting tube. Mounting of equipment is accomplished by properly aligning these holes with the matching holes in equipment and securing with a 2.75" (69.9mm) long bolt. This carbon steel bolt, a bushing, two washers and a lock nut (U.S. thread) are included with the anchor socket. Base diameter is 5 3/16".Special Note: A majority of the necessary parts and accessories from the SR Smith Catalog are listed on our website. Please be aware of your selection before placing an order. If you have any questions please let us know; we are here to help you get the correct part for your application or add a part from the catalog.Check entire box and inside all packing materials for parts. Before beginning assembly, read the instructions and identify parts using the figures and parts listed in this document. It is critical that all parts be carefully inspected by the installer prior to installation to ensure that no damage occurred in transit and that a damaged part is not used. Proper installation cannot be overstressed, as an improper installation voids S.R. Smiths warranty and may affect the safety of the user.
- Suitable for use in surface (deck) mounting a variety of equipment including:
- Slides, Ladders, Handrails, Stair Rails
- For surface-mounting equipment with 1.90" OD tubing
- Requires four 1/4" mounting bolts, not included
- On light to moderate duty residential and light duty commercial installations in most geographic areas.
- Includes: 4 Flanges w/ Hardware
- Outer Diameter Tubing: 1.90" (48.3mm)
- Base Diameter is: 5 3/16"
- 3 Year Limited Warranty
- Customer Reviews
- There are no reviews for this product yet. Be the first to review the product!
Write Your Own Review:
- Questions & Answers
- Please login or register before adding a question.