- Your Shopping Cart is empty.
S.R. Smith CAT-1M-203R 1 Meter Right Mount Tower Assembly
Earn 819 Westside Dollars for every 1 piece purchased.
S.R. Smith's Deluxe 1-meter towers (CAT-1M-203R) are designed for heavy-duty use on competition, commercial pools, or other areas that have a high amount of traffic and use. Known for its high quality use of materials and safety, the S.R Smith Deluxe tower also comes in 3 meter sizes; both accommodate our 14 foot or 16 foot commercial diving boards. All steel components are constructed from carbon steel and are primed ready for paint topcoat.Note: Commercial diving towers and diving boards are sold separately. All Towers are shipped primed only. We recommend a high quality acrylic urethane enamel for a durable finish. All Deluxe towers come standard with a quick adjustable fulcrum (QAF-100) and stainless steel handrailsSpecial Note: A majority of the necessary parts and accessories from the SR Smith Catalog are listed on our website. Please be aware of your selection before placing an order. If you have any questions please let us know; we are here to help you get the correct part for your application or add a part from the catalog.Application: Depending upon installation design and local codes, these models are suitable for use on competition or commercial pools. Site and installation requirements will determine the actual stand sizes and board lengthsS.R Smith Care & Maintenance InformationS.R Smith Warranty Claim Information
- Available in 1 and 3 meter heights
- Can be paired with our 14 Ft or 16 Ft commercial diving board to meet your pool requirements
- Steel base is primed and ready for a paint topcoat
- 1-Meter Right-Mount Diving Tower
- Shipping Weight: 867lbs (393kg)
- Front Post Assembly: The front post assembly is fabricated and concentrically welded to form the required 15 deg angle of the front post when affixed to the jig assembly. The post is manufactured from 10" (254mm) dia., .250" (6.35mm) wall, schedule 20 carbon steel pipe. The lower front post plate is constructed of 15" x 15 x 3/4 (381mm x 381 x 19.05) carbon steel plate and the top post flange is constructed of 15" x 15 x 5/8 (381mm x 381 x 15.88) carbon steel plate.
- Ladder, Heel post, and Handrail Assembly: The ladder posts and heel post are constructed of 1.90" O.D. x .145 wall (48.25mm x 3.68) type 304 stainless steel welded with a mirror finish. The steps are formed and drawn 1/16" (1.6mm) 304 stainless steel and include replaceable skid-resistant pads. The upper handrail assembly is constructed of 1.90" O.D. x .065 wall (48.25mm x 1.65) 304 stainless steel with a polished finish. The assembly is attached to the front and rear of the tray assembly.
- Tray Assembly: The tray is formed from carbon steel and is fabricated from 3/16" (4.76mm) carbon steel plate. The tray is reinforced using 3/8" (9.53mm) carbon steel plates and is welded to the underside at both the front and rear. In addition, two (2) 1/4" (6.35mm) carbon steel gussets are welded to the upper side of the tray.
- Tie-Down Assembly: The tie-down assembly is designed to allow easy access to components located below the board and to raise the board during swim competitions. The assembly includes a tie-down angle sub-assembly, two tie-down straps, and additional hardware.
- Quick Adjustable Fulcrum: The fulcrum assembly consists of brass gears and track that enables incremental ratcheting of the fulcrum adjustment from a standing position.
- Anchor Assembly (p/n 12-108, 13-105, 13-106; see spec sheet for SRS-906): The anchor is constructed of carbon steel. No. 3 rebar is spot welded to six (6) 1" x 8 zinc plated carbon steel bolts to form the 3/4" thick (19.1mm) front post anchor assembly. Rebar is spot welded to 1/2" x 6 zinc plated bolts to form the 3/4" x 5 dia. (19.1mm x 127) ladder anchor assembly plates. The heel post anchor assembly is also constructed of a 3/4" x 5 dia. (19.1mm x 127) plate with four (4) 1/2" x 6 zinc plated bolts.Special Note: A majority of the necessary parts and accessories from the SR Smith Catalog are listed on our website. Please be aware of your selection before placing an order. If you have any questions please let us know; we are here to help you get the correct part for your application or add a part from the catalog.
- 3 Year Limited Warranty
- Customer Reviews
- There are no reviews for this product yet. Be the first to review the product!
Write Your Own Review:
- Questions & Answers
- Please login or register before adding a question.