S.R. Smith CAT-3M-203H 3 Meter Heel Mount Tower Assembly

SKU: 727099
Brand: S.R. Smith Model: CAT-3M-203H Condition: New

S.R. Smith CAT-3M-203H Olympic Diving Towers

  • S.R. Smith CAT-3M-203H Olympic Diving Towers
  • S.R. Smith CAT-3M-203H
  • S.R. Smith Olympic Diving Towers CAT-3M-203H
Our Price: $13,755.99
+ FREE Shipping
Special Phone Offer!
Call for Availability

Ask a Question
About this Product

Purchase 1 piece, and earn 917 Westside Dollars

View All S.R. Smith Diving Boards

Description

S.R. Smith's Deluxe 3-meter towers (CAT-3M-203H) are designed for heavy-duty use on competition, commercial pools, or other areas that have a high amount of traffic and use. Known for its high quality use of materials and safety, the S.R Smith Deluxe tower also comes in 1 meter sizes; both accommodate our 14 foot or 16 foot commercial diving boards. All steel components are constructed from carbon steel and are primed ready for paint topcoat.

Note: Commercial diving towers and diving boards are sold separately.

• All Towers are shipped primed only. We recommend a high quality acrylic urethane enamel for a durable finish.
• All Deluxe towers come standard with a quick adjustable fulcrum (QAF-100) and stainless steel handrails


Special Note: A majority of the necessary parts and accessories from the SR Smith Catalog are listed on our website. Please be aware of your selection before placing an order. If you have any questions please let us know; we are here to help you get the correct part for your application or add a part from the catalog.

Application: Depending upon installation design and local codes, these models are suitable for use on competition or commercial pools. Site and installation requirements will determine the actual stand sizes and board lengths
S.R Smith Care & Maintenance Information
S.R Smith Warranty Claim Information


Features:• Available in 1 and 3 meter heights
• Can be paired with our 14 Ft or 16 Ft commercial diving board to meet your pool requirements
• Steel base is primed and ready for a paint topcoat
Specifications:3-Meter Heel-Mount Diving Tower

Shipping Weight: 1220lbs (553kg)

Front Post Assembly: The front post assembly is fabricated and concentrically welded to form the required 15 deg angle of the front post when affixed to the anchor assembly. The post is manufactured from 10" (254mm) dia., .250" (6.35mm) wall, schedule 20 carbon steel pipe. The lower front post plate is constructed of 15" x 15 x 3/4 (381mm x 381 x 19.05) carbon steel plate and the top post flange is constructed of 15" x 15 x 5/8 (381mm x 381 x 15.88) carbon steel plate.

Ladder and Handrail Assembly: The ladder posts are constructed of 1.90" O.D. x .145 wall (48.25mm x 3.68) type 304 stainless steel welded with a mirror finish. The steps are formed and drawn 1/16" (1.6mm) 304 stainless steel and include replaceable skid-resistant pads. The ladder handrails are 1-5/8" O.D. x .065 wall (41.28mm x 1.65) 304 stainless steel tube. The upper handrail assembly is constructed of 1.90" O.D. x .065 wall (48.25mm x 1.65) 304 stainless steel with a polished finish. The assembly is attached to the front and rear of the tray assembly.

Tray Assembly: The tray is formed from carbon steel and is fabricated from 3/16" (4.76mm) carbon steel plate. The tray is reinforced using 3/8" (9.53mm) carbon steel plates and is welded to the underside at both the front and rear. In addition, two (2) 1/4" (6.35mm) carbon steel gussets are welded to the upper side of the tray.

Tie-Down Assembly: The tie-down assembly is designed to allow easy access to components located below the board and to raise the board during swim competitions. The assembly includes a tie-down angle sub-assembly, two tie-down straps, and additional hardware.

Quick Adjustable Fulcrum: The fulcrum assembly consists of brass gears and track that enables incremental ratcheting of the fulcrum adjustment from a standing position.

Anchor Assembly (p/n 12-105-H, see spec sheet for SRS-905): The anchor is constructed of carbon steel. A 3/4" (19.1mm) thick post jig plate is welded to the tower jig post, which is manufactured from a 10.75" O.D. x .5 wall (273mm x 12.7) pipe. 3/4" x 5 dia. (19.1mm x 127) ladder jig plates are welded to 1.5" O.D. x .15 wall (38.1mm x 3.8) supports. Six (6) 1" by 2 and eight (8) 1/2" x 1-3/4 zinc plated carbon steel bolts are included for the post plate and ladder plates. An aluminum grounding lug is also included.

Customer Reviews

There are no reviews for this product yet. Be the first to review the product!

Write Your Own Review:

 1 star2 stars3 stars4 stars5 stars
Price
Value
Quality



Submit Review

Questions & Answers

Please login or register before adding a question.

If you are a new customer, please register first: