S.R. Smith RecordQuest Long Reach Starting Platform - No Strobe or Anchor
S.R. Smith CHLR1-9999-01A
Ask a Question
About this Product
- Q & A
- Write Your Review
S.R Smith's RecordQuest Long Reach Starting Blocks (CHLR1-9999-01A) are designed in mind for all competitive pools and swimming events. This platform can be ordered to fit almost any deck and water height variable. The RecordQuest comes built to compete with a sturdy stainless steel weldment and is powder coated for corrosion resistance. The anchor has a replaceable sleeve and is designed to prevent the stand from rocking, allowing more consistent start times. The large footboard and step sizes also aid in swimmer development and is great for tall swimmers. Purchase today, just in time for your next event!
This item requires extra specs in order for the order to be completed.
Before ordering, contact us at 1-877-998-9378 regarding necessary specs.
This item is custom ordered, no returns are allowed on this custom made product. Once you have placed your order, fill out the form below with your requested size dimensions. Lead time of 14-21 days applies.
Additional Information & Downloads:
• Including a high-grade stainless steel frame
• Custom color powder coating
• High impact gel-coated footboard with our SureFoot tread
• Meets FINA, NCAA, NFSHSA, USMS, USAS and competition pool rules and regulations
• Height off deck: 20" to 30"
• Setback range: 30" to 40"
• Footboard: 24" x 32"
• Step and Platform: Both the step and platform are constructed of a gel-coat outer surface and a non-slip, sanded tread over a solid laminated board, reinforced with fiberglass. The platform is mounted at a 10 deg angle. The overall dimensions of the step are 2"(50.8mm) thick x 10.5" x 14.5" (266.70mm x 368.30mm) and the platform overall dimensions are 2"(50.8mm) thick x 24" x 32" (609.60mm x 812.8mm).
• Platform Frame: The RecordQuest platform frame is constructed of 2.5 in squared (63.5mm squared) x .120" (3.05mm) wall, stainless steel tubing. The backstroke bar is attached to 1.5 in squared (38.10mm squared) x .065" wall (1.65mm) stainless steel tubing with a cap welded to the end. A backstroke bar constructed of 1.00" O.D. x .065 wall (25.40mm x 1.65mm) stainless steel tubing is also capped with stainless steel. The gusset is made from .125" (3.18mm) stainless steel and the footboard plate is made of .188" (4.77mm) stainless steel. The entire frame assembly is powder coated for added corrosion resistance. Lane numbers are applied to both sides and to the front and rear of the platform.
• Strobe Light (Sold Separately): An optional built-in low voltage strobe is located in the front edge of the platform, allowing swimmers to react to sight as well as to sound. An optional rear strobe allows backup timers to focus on their lane rather than on the starter. Banana plug outlets are accessed at the rear of the platform frame for customer supplied cables.
• Escutcheon: This square escutcheon plate is stamped from .063" (1.60mm) 304 series stainless steel. The dimensions measure a nominal 5.0" x 5.0" x 1.0" (127mm x 127mm x 25.4mm). The Escutcheon is powder coated to match the platform frame.
• Anchor (Sold Separately): (p/n 27-107, see spec sheet for SRS-920) This single post anchor assembly is specially designed to prevent rocking and the liner can be replaced when worn. The assembly consists of a housing constructed of 4.00 in squared (101.60mm squared) x .120" (3.05mm) wall stainless steel tubing welded onto a 4.5 in squared (114.30mm squared) flange. The anchor is threaded and comes with a 1/4-20 UNC stainless steel grounding screw. The insert is made of urethane to facilitate removal of the platform. A stainless steel cap is provided to mount flush on the deck when the platform is removed
You may also be interested in the following product(s)
Our Price: $2,919.99
Our Price: $2,539.99
Our Price: $74.94
Our Price: $382.99