- Your Shopping Cart is empty.
Sloan WETS-2000.1001 Floor Mount Toilet Bowl w/ Manual HET Royal Flush Valve, 1.28 GPF
Earn 30 Westside Dollars for every 1 piece purchased.
Sloan floor mounted standard height toilet systems, combine the performance of both the fixture and the flush valve to ensure a true, water-efficient system. Floor mounted toilets flush with an average of only 1.28 gpf (4.8 Lpf) of water and may be specified with a solar-powered Flushometer to save water and energy. Sensor-operated and manual Flushometers are designed for many years of reliable service. Also available with 1.6 gpf and dual flush. Complete HET system with exposed manual Royal closet Flush Valve and vitreous china fixture. These High Efficiency Toilet Systems are floor mounted with a 1.28 GPF. Toilet Seat Not Included Compatible with toilet seat models: Olsonite 10CT, Bemis 1955CT, & Church Commercial 295CTNOTE: Plumbing System Requirements Minimum Pressure: 25 PSI Minimum Flow Rate: 18 GPMAdditional Information:
- Flush Valve
- PERMEX Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
- Metal oscillating Non-Hold-Open Handle with Triple Seal Handle Packing
- 1" I.P.S. Screwdriver Bak-Chek Angle Stop
- Free spinning Vandal Resistant Stop Cap
- Adjustable Tailpiece
- High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut
- Spud Coupling and Flange for 1-1/2" Top Spud
- Sweat Solder Adapter with Cover Tube and Cast Wall
- Flange with Set Screw
- High copper, low zinc brass castings for dezincification resistance
- Non-Hold-Open Handle, Fixed Metering Bypass and no external volume adjustment to ensure water conservation
- Flush accuracy controlled by CID technology
- Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX rubber compound for chloramine resistance
- Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037Fixture
- Vitreous china
- Floor mounted
- 1-1/2" I.P.S. top spud inlet
- 2-1/8" trapway diameter
- Integral flushing rim
- Elongated bowl
- Siphon jet flush
- Closet bolts and caps included
- 100% factory flush tested
- Toilet seat not included
- Compatible with toilet seat models: Olsonite 10CT, Bemis 1955CT, & Church Commercial 295CT
- Water closet shall be in compliance to the applicable sections of ASME A112.19.2/CSA B45.1
- Compliant with Buy American Act when purchased as a combination
- Order Code: 20001001
- Bowl Dimensions: 26.75" x 15"
- Flush Valve Dimensions: 11-1/2" x 4-3/4"
- Sloan Valve Limited Warranty
Unless otherwise noted, Sloan Valve Company warrants its products to be made of first class materials, free from defects of material or workmanship under normal use and to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three years (one year for special finishes) from the date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts that prove to be thus defective if returned to Sloan Valve Company, at customer's cost, and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations that purchase Sloan Valve Company's products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of batteries.
There are no warranties that extend beyond the description on the face hereof. In no event is Sloan Valve Company responsible for any consequential damages of any measure whatsoever.
- Customer Reviews
- There are no reviews for this product yet. Be the first to review the product!
Write Your Own Review:
- Questions & Answers
- Please login or register before adding a question.