Sloan Wall Mount Toilet Bowl w/ Manual HET Dual Flush Valve, 1.6 GPF
Ask a Question
About this Product
Product Information:Sloan toilet systems, combine the performance of both the fixture and the flush valve to ensure a true, water-efficient system. Wall hung toilets flush with an average of only 1.28 gpf (4.8 Lpf) of water and may be specified with a solar-powered Flushometer to save water and energy. Sensor-operated and manual Flushometers deliver high performance, while minimizing maintenance. Also available in 1.6 gpf and dual flush. Complete HET system with exposed manual Royal dual-Flush Valve and vitreous china Dual Flush wall hung fixture. These High Efficiency Toilet Systems are wall mounted with a 1.6 GPF.
Toilet Seat Not Included
• Compatible with toilet seat models: Olsonite 10CT, Bemis 1955CT, & Church Commercial 295CT
NOTE: Plumbing System Requirements
• Minimum Pressure: 25 PSI
• Minimum Flow Rate: 18 GPM
• PERMEX Synthetic Rubber Diaphragm with Dual Filtered Fixed Bypass
• Lifting Handle UP initiates reduced flush (1.1 gpf/ 4.2 Lpf), eliminating liquid and paper waste, saving a 1/2-gallon of water
• Pushing Handle DOWN initiates full flush (1.6 gpf/6.0 Lpf), eliminating solid waste and paper
• Antimicrobial Coating on Handle protects against germs
• ADA compliant metal oscillating Non-Hold-Open Handle with Triple Seal Handle Packing
• 1" I.P.S. Screwdriver Bak-Chek Angle Stop
• High Back Pressure Vacuum Breaker Flush Connection with One-piece Bottom Hex Coupling Nut
• Spud Coupling and Flange for 1-1/2" Top Spud
• Sweat Solder Adapter with Cover Tube and Cast Wall Flange with Set Screw
• Non-Hold-Open Handle, Fixed Metering Bypass and no external volume adjustment to ensure water conservation
• Flush accuracy controlled by CID technology
• Diaphragm, Handle Packing, Stop Seat and Vacuum Breaker molded from PERMEX rubber compound for chloramine resistance
• Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi-Red Brass. Valve shall be in compliance to the applicable sections of ASSE 1037.
• Wall hung vitreous china dual flush elongated bowl
• Siphon jet flushing action
• 1-1/2" I.P.S. top spud inlet
• 2 1/8" fully glazed trapway diameter
• Integral flushing rim
• Water spot area 9 1/2" x 8 1/4"
• Mounting hardware, carrier and toilet seat not included
• Compatible with toilet seat models: Olsonite 10CT, Bemis 1955CT & Church Commercial 295CT
• Compatible with carrier model: Jay R. Smith 0210Y-M54
• Water closet shall be in compliance to the applicable sections of ASME A112.19.2/CSA B45.1
• Compliant with Buy American Act when purchased as a combination
Specifications:• Order Code: 20521002
• Bowl Dimensions: 26.75" x 14"
• Flush Valve Dimensions: 11-1/2" x 4-3/4"
Unless otherwise noted, Sloan Valve Company warrants its products to be made of first class materials, free from defects of material or workmanship under normal use and to perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three years (one year for special finishes) from the date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts that prove to be thus defective if returned to Sloan Valve Company, at customer's cost, and this shall be the sole remedy available under this warranty. No claims will be allowed for labor, transportation or other incidental costs. This warranty extends only to persons or organizations that purchase Sloan Valve Company's products directly from Sloan Valve Company for purpose of resale. This warranty does not cover the life of batteries.
There are no warranties that extend beyond the description on the face hereof. In no event is Sloan Valve Company responsible for any consequential damages of any measure whatsoever.
Write Your Own Review:
Questions & Answers
If you are a new customer, please register first: