Uponor Wirsbo EP Heating Manifold Assembly with Flow Meter, Radiant Heating & Cooling, 5-Loop
Uponor Wirsbo A2670501
Ask a Question
About this Product
About the Uponor Wirsbo A2670501 EP Heating Manifold Assembly with Flow Meter, Radiant Heating & Cooling, 5-Loop
The Uponor Wirsbo A2670501 is a heating manifold assembly with flow meter that is a breeze to set up and to enjoy. This top-notch tool is for use in hydronic radiant heating and cooling systems and includes flow meters with isolation and balancing valves, manifolds with five loops, body ends with R32 unions and loop outlets with R20 male threads. The manifold mounts effortlessly to a bracket and the best part of it all is that the Uponor Wirsbo A2670501 comes to you completely assembled and ready for action.
This product is high in quality and well-known to get the job done. It’s made from tough materials that were meant to last so that you can be sure that it will keep going for a long time. Although its strong build is perfect for efficient use, its pre-assembled engineered plastic body is what really sets it apart. You’ll love being able to bring this tool home and put it to good use immediately and you’ll love being able to enjoy its accurate output for quite some time. Sturdy and convenient, the Uponor Wirsbo A2670501 is the heating manifold assembly for you.
Use only propylene glycol in radiant systems with EP Heating Manifolds; never use ethylene glycol.
Features:• Completely assembled for ease of installation in hydronic radiant heating and cooling systems
• Features isolation and balancing valves with flow meters
• R32 unions and the loop outlets have R20 male threads
• Mounts on a bracket (A2670006) that comes with the assembly
Specifications:• Manifold, Connecting Piece, Elbow, End Part: PA66-GF30
• Height: 14.0"
• Width: 15.6"
• Depth: 2.7"
• Weight: 5.48 lbs.
• Bracket, Locking Screw: PA66-GF15
• Valve Insert (all plastic parts), Handwheels: POM
• Adjusting Screen: ABS
• Glass Flow Meter: PA12
• Metal Inserts: Brass C38500
• Axel: Stainless Steel
• Max. Test Pressure (24 h, 86 Degrees F) tested with water: 145 psi (10 bar)
• Max. Test Pressure (24 h, 70 Degrees F) tested with air: 100 psi (7 bar)
• Max. Water Flow per Manifold: 0.97 l/s 15.4 gpm
• Cv Value Inlet/Outlet Valves: 1.35
• Spring: Stainless Steel
• O-ring: EPDM
• Flat Gasket: IT-C
• Adaptable Actuators: EP Heating Manifold, two-wire Actuator (A3030522);Thermal Actuator, four-wire (A3010522) with EP Heating Manifold Actuator Adaptor (A2671300)
• Max. Operating Temperature and Pressure: 6 bar at 60 Degrees C 87 psi at 140 Degrees F; 5 bar at 70 Degrees C 72 psi at 158 Degrees F; 4 bar at 80 Degrees C 58 psi at 176 Degrees F; 3 bar at 90 Degrees C 44 psi at 194 Degrees F
Write Your Own Review:
Questions & Answers
If you are a new customer, please register first: